EC802/ec803 series eclipse maxi - led 8 pole/wall mount 1 materials eclipse is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. the lower cast aluminum housing fits with a 4 (102) or 5 (127) pole and contains all electrical controls on a removable tray. electrical led driver standard driver is 0-10v dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60hz), optional 347v on request, minimum operating temperature of -30oc/-22of, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110oc) . led type ii, iii or v light distribution via high performance optical lenses. standard 4000k/80cri. optional 2700k, 3000k and 3500k. removable modular led platform. optional amber led for turtle sensitive areas. wavelengths: 584.5nm to 597nm. life 75,000hrs l 86 b 50 (based on iesna tm-21 test method and lm-80 data). 145,000hrs l 70 b 50 (calculated projection from lm-80 data). finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight: 29lbs (13kg) eclipse is designed for ease of access and installation. standard luminaire mounts on a 4 (102) or 5 (127) pole. alternate pole or wall attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. photometric testing performed by an independent laboratory in accordance with ies lm-79-08 standards at 25oc. lumen depreciation in accordance with iesna lm80 standards. ce certification on request. rated ip65. ec803 epa: 1.15 EC802 epa: 0.98 1- heavy cast aluminum top cover with integral led heat dissipating pad. 2- 30 dia. x .090 (2.3) thick hard aluminum top shade. underside surface is painted white enamel to optimize light performance (ec803 only). 3- set of three aluminum louvers. 4- set of 4 x 1/2 (13) solid aluminum struts. 5- cast aluminum upper electrical housing. 6- cast aluminum lower electrical housing. nov 2017 rev 0 EC802 ec803 3 2 5 4 1 6 29.4 (747) 29.4 (747) 30 (762) 12.5 (317) luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis type: quantity: project: catalog number: fixture wattage voltage finish option option option option
2 EC802/ec803 series eclipse maxi - led nov 2017 rev 0 standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color (refer to color chart) 120v 277v optional 347v model# led light selection (4000k/80cri) voltage 1 finish EC802 ec803 luminaire selection notes 1- luminaires are factory prewired for 120v (if no voltage is specified). for other voltages, please specify with catalog number or consult factory. 2- fuse and photocell options are normally installed with poles when specified with luminis luminaires (except for other types of mounting). 3- 3 tenon pole adaptor only required for 3 o.d. poles by others. 4- blc: back light control - type ii distribution. mounting electrical ac8 pole mount attachment with 45o support 2ac8 double pole mount attachment with 45o support at 180o aw8 wall mount attachment with 45o support ec8p pole mount attachment with stacked arms 2ec8p double pole mount attachment with stacked arms at 180o ec8ps pole mount attachment with short stacked arms (EC802 only) 2ec8ps double pole mount attachment with short stacked arms at 180o (EC802 only) ec8w wall mount attachment with stacked arms ec8ws wall mount attachment with short stacked arms (EC802 only) tn3 3 tenon pole adaptor 3 pr8 pedestal mount adaptor fs fuse 2 ph photocell 2 347l 347v input power driver options accessories blc back light control 4 input delivered watts lumens model 22w 2436 EC802-l1w18r1-r2 ec803-l1w18r1-r2 38w 4147 EC802-l1w30r1-r2 ec803-l1w30r1-r2 77w 8083 EC802-l2w30r1-r2 ec803-l2w30r1-r2 22w 2409 EC802-l1w18r1-r3 ec803-l1w18r1-r3 38w 4058 EC802-l1w30r1-r3 ec803-l1w30r1-r3 76w 8331 EC802-l2w30r1-r3 ec803-l2w30r1-r3 22w 2224 EC802-l1w18r1-r5 ec803-l1w18r1-r5 38w 3742 EC802-l1w30r1-r5 ec803-l1w30r1-r5 76w 7675 EC802-l2w30r1-r5 ec803-l2w30r1-r5 type iii type v type ii light alternate cct ok led (lcf: lumen conversion factor) k27 2700k cct 80 cri (lcf: 0.91) k3 3000k cct 80 cri (lcf: 0.94) k35 3500k cct 80 cri (lcf: 0.98) note: other cct & higher cri available, please consult factory. amber led light selection input delivered watts lumens model 17w 388 EC802-l1w18k2a ec803-l1w18k2a luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
3 power feed 42.2 (1072) 30 (762) 17.75 (451) 18 (457) 12 (304) 12 (304) 12 (304) 34.5 (876) paa pole series 28 (711) power feed power feed psb pole series pst pole series EC802/ec803 series eclipse maxi - led nov 2017 rev 0 pole mount ac8 1 x 3 (25x76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) pr8 8 dia.(203) x 8 3/4 (222)h. extruded aluminum stand designed for short walls or pier mount. ec8p (EC802 and ec803) set of (2) 1 x 3 (25x76) extruded aluminum side pole straight mounting. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.97) ec8ps (EC802 only) set of (2) 1 x 3 (25x76) extruded aluminum side pole straight mounting. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.72) note : pst pole with ac8 or 2ac8 attachment requires a 30 (762) tenon extension over pole nominal height. ec8p, 2ec8p, ec8ps and 2ec8ps require an 18 tenon extension. factory installed. ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 pst10 ------- psb10 10 ft. (3 m) paa412 paa512 pst12 ------- psb12 12 ft. (3,6 m) paa414 paa514 pst14 ------- psb14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb16 16 ft. (4,8 m) paa418 paa518 ------- pta18 psb18 18 ft. (5,5 m) paa420 paa520 ------- pta20 psb20 20 ft. (6,0 m) ------- ------- ------- pta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matching pole selection 42.2 (1072) 42.2 (1072) 8 dia. (203) base 6 (152) dia. bolt circle 4 (102) dia. power feed opening 2ac8 double pole mount attachment with 45o support at 180o 2ec8ps double pole mount attachment with short stacked arms at 180o (EC802 only) 2ec8p double pole mount attachment with stacked arms at 180o pta pole series luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
4 ec8ws (EC802 only) set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. 18 (457) power feed 11 (279) power feed power feed 42.2 (1072) 17.75 (451) 28 (711) EC802/ec803 series eclipse maxi - led nov 2017 rev 0 4.625 (118) 3 (76) 17.75 (451) power feed 3 (76) 4.625 (118) power feed 6.125 (156) 3 (76) 4.625 (118) power feed 6.125 (156) wall mount aw8 1 x 3 (25x76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. ec8w (EC802 and ec803) set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. mounting mounting mounting 42.2 (1072) 42.2 (1072) luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
typical photometry summary EC802/ec803 series eclipse maxi - led please visit our web site www.luminis.com for complete i.e.s. formatted download data. type ii descriptive information EC802-l1w30r1-r2 ec803-l1w30r1-r2 total lms: 4147 lumens total input watts: 38.2 w source: led efficacy: 108.6 lumens/watt bug: b2-u0-g2 cct/cri: 4000k/80 maximum candela: 3938 @ 75oh/70 ov descriptive information EC802-l2w30r1-r2 ec803-l2w30r1-r2 total lms: 8083 lumens total input watts: 76.9 w source: led efficacy: 105.1 lumens/watt bug: b3-u0-g3 cct/cri: 4000k/80 maximum candela: 6682 @ 72.5 oh/67.5ov type iii descriptive information EC802-l1w30r1-r3 ec803-l1w30r1-r3 total lms: 4058 lumens total input watts: 38.2 w source: led efficacy: 106.3 lumens/watt bug: b2-u0-g2 cct/cri: 4000k/80 maximum candela: 2931 @ 65oh/70 ov descriptive information EC802-l2w30r1-r3 ec803-l2w30r1-r3 total lms: 8331 lumens total input watts: 76.3 w source: led efficacy: 109.2 lumens/watt bug: b2-u0-g2 cct/cri: 4000k/80 maximum candela: 5780 @ 62.5 oh/67.5ov type v descriptive information EC802-l1w30r1-r5 ec803-l1w30r1-r5 total lms: 3742 lumens total input watts: 37.9 w source: led efficacy: 98.8 lumens/watt bug: b2-u0-g1 cct/cri: 4000k/80 maximum candela: 1432 @ 0oh/65 ov descriptive information EC802-l2w30r1-r5 ec803-l2w30r1-r5 total lms: 7675 lumens total input watts: 76.1 w source: led efficacy: 100.8 lumens/watt bug: b3-u0-g2 cct/cri: 4000k/80 maximum candela: 2992 @ 0oh/65 ov nov 2017 rev 0 5 luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
|
